# Midi Clock Fader

**URL:** <https://ksoloti.discourse.group/t/midi-clock-fader/486>\
**Category:** Share Your Patch\
**Created:** [October 11, 2026, 12:44pm UTC](https://ksoloti.discourse.group/t/midi-clock-fader/486 "2026-10-11T12:44:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shellbeat](https://yyz2.discourse-cdn.com/free1/user_avatar/ksoloti.discourse.group/shellbeat/32/673_2.png) [@Shellbeat](https://ksoloti.discourse.group/u/Shellbeat)\
**Post date:** [October 11, 2026, 12:44pm UTC](https://ksoloti.discourse.group/t/midi-clock-fader/486/1 "2026-10-11T12:44:06Z")

</div>

The initial idea was about to feed a 2nd sequencer with a different tempo than the master clock gives (my need are 3-4 polyrhythms).

Here the Midi clock slave patch from Johannes Taelman is used and connected with some tick to pitch to saw to clock conversion.

Tempo offset via midi CC3 in 2 ways:

- snap\_on active = CC3 0–26 → 1/1, 27–90 → 3/4, 91–127 → 1/2.
- snap\_on inactive = CC3 0–127 → **continuous changes** between 1/1 and 1/2.

Clock Delay via midi CC4. Delayed is the start pulse (for saw\_1.reset / works, but not really tested right now)

Done with the support of Claude. Jitter is not tested right now.

 ![Clockfader_kbeat_avg 2](https://global.discourse-cdn.com/free1/uploads/ksoloti1/original/1X/26c1a8bee754b32625f2afdfc1de7134d6ca400d.png)

[Clockfader\_kbeat\_avg.axp](https://ksoloti.discourse.group/uploads/short-url/udjE58i6Se2DZXpPfACNBPtOfHA.axp) (30.1 KB)