# MIDI Sysex Receive Object

**URL:** https://ksoloti.discourse.group/t/midi-sysex-receive-object/185
**Category:** Axo Object Coding
**Tags:** usb, midi, sysex, din
**Created:** [January 29, 2025, 12:31pm UTC](https://ksoloti.discourse.group/t/midi-sysex-receive-object/185 "2025-01-29T12:31:11Z")
**Posts on this page:** 3
**Page:** 2

<div class="post-metadata">

### Author: ![MarioMalidus](https://avatars.discourse-cdn.com/v4/letter/m/d07c76/32.png) [@MarioMalidus](https://ksoloti.discourse.group/u/MarioMalidus)
#### Post date: [February 2, 2025, 1:18pm UTC](https://ksoloti.discourse.group/t/midi-sysex-receive-object/185/21 "2025-02-02T13:18:12Z")

</div>

Thank you for your advices!

I did come a small step further:

I tested to send from Ksoloti direct to my MacBook (via Midi USB Cable):

 ![IMG_0595](https://global.discourse-cdn.com/free1/uploads/ksoloti1/original/1X/763831a292bb8110a50e97156d2002d8af68223a.jpeg)  
Interesting: in DIN Mode (Object) the USB Midi Led is flashing - but no Midi Message in the Midi Monitor coming in - hmm. But definitly a reaction when I moving my Poti 🙂

 ![IMG_0592](https://global.discourse-cdn.com/free1/uploads/ksoloti1/original/1X/eca8562289836884cc649278b045ea070f7498dc.jpeg)

When changing to “USB Device” on the Ksoloti the USB Connector does not flash anymore - but the Midi signal is going in (Midi Monitor)

 ![IMG_0593](https://global.discourse-cdn.com/free1/uploads/ksoloti1/original/1X/1d390b7f64db7e4f868f5e2453705d12350593bc.jpeg)

---

<div class="post-metadata">

### Author: ![MarioMalidus](https://avatars.discourse-cdn.com/v4/letter/m/d07c76/32.png) [@MarioMalidus](https://ksoloti.discourse.group/u/MarioMalidus)
#### Post date: [February 2, 2025, 2:27pm UTC](https://ksoloti.discourse.group/t/midi-sysex-receive-object/185/22 "2025-02-02T14:27:37Z")

</div>

Correction: I have full Midi information from the Ksoloti to the MacBook! 😃 😃 😃  
It wasn’t a good idea to use the axolotis DIN Conectors because of the inner circuit. So I did remove the DIN Connectors from my Axoloti.  
Now I will try it with an Resistor to the Kemper.

Ksolotis Midi IO works fine!

Thank you for your advices!

---

<div class="post-metadata">

### Author: ![MarioMalidus](https://avatars.discourse-cdn.com/v4/letter/m/d07c76/32.png) [@MarioMalidus](https://ksoloti.discourse.group/u/MarioMalidus)
#### Post date: [February 2, 2025, 3:22pm UTC](https://ksoloti.discourse.group/t/midi-sysex-receive-object/185/23 "2025-02-02T15:22:29Z")

</div>

AAAAhh - So close!!  
You were right! I found a 500Ohm Resistor. I putted in between MO5 and 5V not much change in Voltage but Kemper Profiler does react.

But now it won’t connect to the software anymore aaaah

So now I have to make a switch to remove the resistor from the circuit??? any other solution?

Regarding Mario

 ![Bildschirmfoto 2025-02-02 um 16.22.04](https://global.discourse-cdn.com/free1/uploads/ksoloti1/original/1X/dee60d3cd10c3668566a5fcef5fa5300a94bc040.png)

UPDATE: With 250 Ohm now it works fine, KEMPER REACTS AND SOFTWARE DOES RECOGNIZE KSOLOTI -  
YIPIEEEEEEE :-)))))))))))

[Previous page](https://ksoloti.discourse.group/t/midi-sysex-receive-object/185.md?page=1)