The initial idea was about to feed a 2nd sequencer with a different tempo than the master clock gives (my need are 3-4 polyrhythms).
Here the Midi clock slave patch from Johannes Taelman is used and connected with some tick to pitch to saw to clock conversion.
Tempo offset via midi CC3 in 2 ways:
- snap_on active = CC3 0–26 → 1/1, 27–90 → 3/4, 91–127 → 1/2.
- snap_on inactive = CC3 0–127 → continuous changes between 1/1 and 1/2.
Clock Delay via midi CC4. Delayed is the start pulse (for saw_1.reset / works, but not really tested right now)
Done with the support of Claude. Jitter is not tested right now.
Clockfader_kbeat_avg.axp (30.1 KB)